Shower holder - Suporte Chuveiro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall shower holder for single hole on wall Suporte de chuveiro para parede com 1 unico furo
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Suporte de Chuveiro com apenas 1 furo na parede.
Maioria dos suportes usam 2 furos, e bem! Mas necessitava de um suporte para substituir o antigo suporte de chuveiro, como era bastante antigo e so usava 1 furo, desenhei 1.
Impresso em PLA ha 2 anos e ainda la esta com 3 walls e 40% infill, aconselho pelo menos 5 walls, infill grid e infill 40%, não necessita de infill a 100%
Shower support with only 1 hole in the wall.
Most brackets use 2 holes, and that's fine! But I needed a support to replace the old shower support, as it was quite old and only used 1 hole, so I designed 1.
Printed on PLA, 2 years ago and it's still there with 3 walls and 40% infill, I advise at least 5 walls, infill grid and 40% infill, no need for 100% infill