FX Wildcat MK3 - barrel band (open version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Barrel band on Wildcat MK 3 is used to stabilise all to flimsy barrel and compensate for barrel droop
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Barrel band on Wildcat MK 3 is used to stabilise all too flimsy barrel and compensate for barrel droop which is very visible with any kind of moderator attached to the end of the barrel
In addition, it can act as a barrel tuner, put it in a wrong place, groups will open up significantly, put it in a right space, groups do go down in size
Every printer is different regarding printing circles, some print them tighter, some don't, it all depends on your setup so please, do pay attention on your settings and tweak the size of the .STL as needed or the printer settings.
This .STL works on my printer, it is not a given that it will on everybody's else
Two M4 screws and nuts are needed to clamp it down after installation
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,16
Infill:
36
Filament:
Black Post-Printing =============
This thing can be sanded and painted on the outside visible side
Category: Sport & Outdoors