1 / 4
KUSBA Clip On Extruder Mount and Bed Mount for Elegoo Neptune 3 Pro/Plus/Max
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combination mount for KUSBA 3 that clips on the top of the extruder, or clamps on the bed.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 2323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (54)Powiązane
Conveniently run resonance testing for Klipper input shaping without having to change mounts. This mount clips on the top of the extruder for X-axis measurement, or clamps onto the bed for Y-Axis measurement. Designed to print without supports. Brim recommended.
Hardware:
2 M3 x 12mm with nuts to mount the board
2 M3 x 16mm with nuts for the clamp - works great with these thumb screws. Super glue the nuts into the pocket for ease of use.
