Ferrari SF23 front & rear wing for hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cool mod for your hat to wear at your favorite GP, or in case you just need more aerodynamics in your life!
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 970
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this front and rear wing of the SF23 from Scuderia Ferrari to be mounted on a hat to wear at the Italian GP. You'll find 2 stls and 2 Lychee files since this was printed with resin. The stls are not supported while the Lychee files are, these are supports for RESIN printers. I don't know if these models can be printed on a fdm printer since the wings are quite slim, but obviously you can try.
To mount the wings on a hat I glued the front (I had to sand the gap a bit) and for the back I glued 1 clip and tied another one with strings.
Happy printing!
P.S. If you want to tip me 10 bucks buy this model here:
https://www.cgtrader.com/3d-print-models/fashion/other/ferrari-sf23-front-and-rear-wing-for-hat