1 / 7
Earphone Magnetic Hinged Case — zdjęcie 1
1 / 7

Earphone Magnetic Hinged Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy duty case for protecting your wired earphones and keeping them from getting tangled. The PLA version has larger…

Ocena
0 / 5
Polubienia
3
Pobrania
34
Wydruki
0
Wyświetlenia
273
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

Heavy duty case for protecting your wired earphones and keeping them from getting tangled. The PLA version has larger magnet holes to account for shrinkage. Uses 6 3mm x 1.8mm magnets. Earphone hole diameter is 17.2mm.

Inserting magnets into the PETG may require some force. Connecting the cover to the base will also require some force. Start with one side and go from there. you will want to open and close the case a bunch of times to loosen it up. The lower the resolution the better.

Tagi