OSRS home teletab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A teleport to home table from old school runescape, supports filaments swaps for multi-color printing
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 926
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A teleport tablet from oldschool runescape.
I designed this in fusion 360 from scratch. The different colored sections are separated by 0.6mm (3 layers at 0.2mm layer height) so you can insert filament swap gcodes at the layer changes.
I didn't have the correct blue on hand, but I still think it came out pretty well. Printed on a Prusa Mk4 with the 0.2mm structural input shaper profile. Filament swaps can be inserted pretty easily in PrusaSlicer with these steps (other slicers should have similar functions).
[edit 2026/10/3]
I added a version with the colors recessed. This makes for a flatter top surface, but you end up with banding around the outside if you are doing whole-layer color swapping.