Canon EFM 22mm f2 lens 43mm thread filter case (45.7mm X 5.5mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Threaded case for 43mm thread filters used in Canon EFM22mm f2 lens. (see description for specific filter size)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside thread for easy access and removal.
Filter measurements:
- diameter: 45.7mm
- height: 5.5mm
This specific filters have a 43mm thread to be used on a Canon 22mm f2 EF-M lens, however if your filter have the same measurement they should fit no issues.
While this model is not parametric it may work like it if scaled (haven't tried it). Still working on a true parametric model.
*when printing the lid only file be sure to rotate 180 deg the lid.
*this does not work work for CPL or variable ND filters since the adjustment ring add height (I’ll be uploading a model for those)
Included files:
- both lid and body for one print
- lid only file
- body only file
Printer parameters:
- Model: Creality Ender 3S1
- Material: PLA
- Infill: Grid, 20%
- Print speed: 50 m/s
- Nozzle: 200 degC
- Bed: 60 degC
- Adhesion: skirt
- Supports: not needed
