SCUBA Tank bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bulkhead mount bracket for SCUBA tanks with a 190 mm diameter.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 197
- Wydruki
- 0
- Wyświetlenia
- 1663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to take ¼ inch bolts and nuts (I'm in the USA, what can I say) and attach through a treated plank. The straps are 25 mm wide and 1 mm thick nylon.
These are designed around my brother's tanks with an 190 mm nominal dimension. They are not meant to hold the weight of the tanks but to secure them upright against a rail/bulkhead while standing on the deck or floor. The nut holes are to be printed facing up, but installed to drain. There is a similar drain for the webbing on the same side.
Included is a printable template to make marking the holes simpler.
Mine are printed in PET-G with solid infill around the bolt holes. The rest was at 5 walls, 40% cubic infill and 0.3 mm height with 0.4 mm nozzle.