Fully Adjustable Shooting Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully adjustable shooting rest for most firearms and airsoft rifles that are not bipod compatible.
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 573
- Wydruki
- 1
- Wyświetlenia
- 2883
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fully adjustable shooting rest that fits most firearms and airsoft rifles. Adjustments allow you to correct for wobble on uneven surfaces as well as for perfect height with almost 12" of vertical adjustment potential.
This design features hollow channels in the rods and base that allow you to fill it with pennies or any other metal you can fit inside, this increases the weight and makes it quite sturdy on the bench, which helps a ton!
--- Printing & Assembly notes ---
Print the amount of each component listed in the file name. Assemble like the picture, I recommend printing with organic supports on internal threads. Please try to calibrate your printer if you are not confident with printing threads, These threads have a tolerance to 0.0075" which is enough for my printer.
In case of tight fit, try lubrication or lightly sanding the perimeter of the rod. My printer had no trouble printing these threads unsupported when sliced vertically.
I printed at 0.28mm layer height, but use what you feel is appropriate for your setup.