1 / 3
DJI Osmo Pocket Gopro and 1/4" camera tripod mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a convenient mount for the DJI Osmo Pocket that could be used with a regular 1/4-20" camera mount or a go pro…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a convenient mount for the DJI Osmo Pocket that could be used with a regular 1/4-20" camera mount or a go pro style mount. I also added tabs on the side to clamp down the camera and not let it fall out. Also allows for charging during while in the mount depending on the tripod mount.
In order for the camera mount to work you must insert a 1/4" nut before it closes up. I use an m600 command at 7.2mm
Category: Camera