Bnei Brak Biluna Roller Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project I did for the Municipality of Bnei Brak. They had an Amusement park this summer and wanted a 3d…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 2006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
This is a project I did for the Municipality of Bnei Brak. They had an Amusement park this summer and wanted a 3d printed version for their donors.
I printed the base on its side no supports needed. The pillars with supports laying down with arms up except for the one with the arms on both sides in its normal position. the slides should be printed standing up with supports. A brim can help prevent them from falling over. The Roller coaster car was printed with a 0.2mm nozzle with supports from the bed only.
Print Settings
Printer:
Trilab DeltiQ
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament:
Fillamentum Pla ExtrafillMukha, Sky Blue, Traffic Red, Rapunzel Silver
Category: Buildings & Structures