1 / 3
Generative Design Plant Support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this model using generative design to create a plant holder with three different holder locations spaced around an arc. Feel free to scale in the Z axis only as needed to fit your print height.
To print, supports are not needed. I do recommend a brim though. There are custom supports in the model which you break off after printing. This reduces print time by a few hours versus traditional or organic supports.