1 / 4
food fish dispenser / distributeur nouriture poisson — zdjęcie 1
1 / 4

food fish dispenser / distributeur nouriture poisson

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

food fish dispenser 1 time by day / distributeur de nourriture de poisson 1 fois par jour

Ocena
0 / 5
Polubienia
5
Pobrania
31
Wydruki
1
Wyświetlenia
439
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

ENGLISH

for the holidays I needed a fish food dispenser

I therefore designed this one based on a florinux model (https://www.myminifactory.com/object/3d-print-food-dispenser-for-fish-122134) by modifying the type of distribution ( not by pressure but by sliding which requires less effort for the Servo motor)

I put in the description the arduino code to make it work once a day (adapted according to the quantity distributed)

for assembly, simply put the p3 in the base, aligning the passage well (you can add a dot of glue when it is well aligned)

then put the p1 on the food tank (from the store open cap or simply emptied the food in)

put the p4 in its housing then screw the gear (p2) on the servo motor

if you like to put a heart (I like) it encourages me to make other creations

FRANCAIS

pour les vacances j'ai eut besoin d'un distributeur de nourriture pour poisson

j'ai donc conçut celui-ci en me basant sur un model de florinux ( https://www.myminifactory.com/object/3d-print-food-dispenser-for-fish-122134) en modifiant le type de distribution ( pas par pression mais par coulissement qui demande moin d'effort pour le Servo moteur )

je met dans la description le code arduino pour le faire fonctionner 1 fois par jour ( a adapté en fonction de la quantité distribué)

 

pour le montage il suffit de mettre la p3 dans la base en alignant bien le passage ( vous pouvez mettre un point de colle quand il est bien aligné )

ensuite mettre la p1 sur le réservoir de nourriture ( du magasin capuchon ouvert ou vidé tout simplement la nourriture dedans )

mettre la p4 dans son logement puis vissé l'engrenage (p2) sur le servo moteur

si vous aimez mettre un coeur (j'aime) cela m'encourage a faire d'autre fabrications

Tagi