Seeed Studio XIAO SAMD21
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A CAD asset for fellow makers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a scale model of the Seeed Studio XIAO SAMD21, a ATSAMD21G18A-MU board with various useful functionality and costs $5.40. The product page for this device can be found here.
It is intended for makers building electronics to include in their design process, as it removes the extensive process of measuring this part to fit when designing your wonderful lamps/clocks/robots/etc.
If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly at the Shapr3D viewer here.
If you build something and use this as an asset, please make me happy by posting it in the makes section!
Tolerances
When designing things using this model in my experience adding 0.2mm around the board will lead to a tight fit that holds the device in place. However, your boards may have slight differences depending on the batch, or perhaps your printer settings will mean more or less of a gap is needed. 0.2mm is probably a good starting point.
It is suggested that a 0.4mm gap is placed around the USB-C port, as this should not be a very tight fit.
Versions
2023.10.04: Update board thickness, USB-C port height and offset to board based on feedback.
2023.09.06: Original upload.