1 / 3
Quick release plate / Schnellwechselplatte (42x42mm) für Cullmann Stative
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dies ist ein Ersatz für verlorene Schnellwechselplatten (42mm x 42mm) der beliebten Cullmann-Stative
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 278
- Wydruki
- 1
- Wyświetlenia
- 960
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (1)Kolekcje (24)Powiązane
- gedruckt aus PLA, 1,2mm Wandstärke, 17% Füllung, Muster: Dreiecke (mit zwei Linien)
- Eine separate Schraube zur Befestigung der Kameras wird benötigt
- evtl. muss der Bügel von einigen Schrauben entfernt werden
- Ich habe oben (beim Druck unten liegend), mit elastisch aushärtendem Sekundenkleber, eine Gummischicht mit 1mm befestigt
- Gummimatten können als "Dichtungs-Rohmaterial zum selber zuschneiden" auf ebay gekauft werden
- Die Druckdauer lag mit 35/55 m/min bei knapp unter einer Stunde
in english:
- printed with 1,2mm wall thickness and 17% infill (two Lines)
- A separate screw is needed. There are many on ebay. Maybe you have to remove the bail
- I glued a 1mm Rubber on it with elastic hardening Cyanacrylat. You can find them on ebay
- printtime (35/55m/h) about an hour