Modular Plant Climbing and Growth Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be put together, expanded or changed according to your needs. All printable with MINI+
- Ocena
- 4,5 / 5
- Polubienia
- 201
- Pobrania
- 399
- Wydruki
- 2
- Wyświetlenia
- 2773
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Combine the ideal plant climber, no matter how tall / big / wide.
Choose out of 33 basic pieces.
Basic width = 60, 80, 100 or 120mm
Create corners / square / triangle / hexagon supports.
Label plants with the added signs (tip: you can add engraving in the slicer).
I did printing with: 0.4 / 0.2 / 10-15% / no supports or brim. You can probably also use a larger nozzle.
When stacking, use a crosbeam to secure the poles together (see photos).
All parts are put together using clamp fit. No glue needed for a solid assembly!
07-09: added Top part left & right 90 degree twist. Use a set at the top of poles to place the upper arches at 90° (make a rose arch).