1 / 3
Wolf River Coils TIA 24" Tripod and 102" Whip Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize my 24" Tripod legs and 102" whip from Wolf River Coils.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (10)Powiązane
The tripods legs are meant to go through the holder and the whip got into the thicker slot. The idea is to print 2 of them and put them on opposite sides and use a short length of paracord to keep slight tension to keep it all together, although once printed (for v1 at least) the fit is nice and tight and doesn't seem absolutely necessary. If nothing shows in your slicer scale to 1000%