X1C Buffer PTFE Guide, Magnetic - May prevent buffer jamming.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Possible fix for filament jamming while ENTERING Bambu Lab X1C buffer mechanism.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 118
- Wydruki
- 3
- Wyświetlenia
- 779
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I kept having “Failed to feed the filament into the toolhead" error messages. I discovered my filament was not getting past the buffer assembly mounted on the rear of the X1C.
On my printer, the PTFE tube enters the buffer at a slight angle and causing the filament to get hung up on the quick disconnect. My fix was a simple magnetic guide to keep the PTFE aligned when entering the buffer. May not solve all issues but seems to be working well for now…
Need a 12mm x 3mm magnet and some glue.
I included a 2 x magnet version of the guide in case your magnet isn't strong enough or you want a little more rigid of a setup. Comment or send me a message if you want a different magnet size and I might be able to accommodate. STEP file included if you want to make changes yourself.