Nintendo Switch Joy-con Thumbstick Cover Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nintendo Switch Joy-con Thumbstick Cover Replacement Why Make Replacements? During an overseas trip, I pulled out my…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 1833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- GNU General Public License v2.0
Nintendo Switch Joy-con Thumbstick Cover Replacement
Why Make Replacements?
During an overseas trip, I pulled out my Nintendo Switch and noticed that the silicone cover on one of the thumbsticks had slipped off. I could not find a replacement online and I was not satisfied with other options available on Thingiverse. Therefore, I set out to make my own.
How Does it Work?
After printing out, the replacements attach by hugging the top part of the thumbstick. I created a groove inside the covers that will allow them to stay on the thumbstick without the use of glue. They fit a bit snug but since they are printed using soft TPU, the covers should stretch over the top of the thumbstick--much like fitting a tire on a bike rim.
Problems?
Let me know if you have any issues and I will work to correct them. I am no expert but I am willing to work with anyone on improvements.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.15 mm
Infill:
Yes - 60% Gyroid
Filament:
NinjaTek NinjaFlex (TPU - 85A) Black
Notes:
This was printed face-up with the supports only touching the print bed (setting in Cura 4.1). I went about 10-15 mm per second to obtain a good quality print.
Category: Video Games