SV07 Plus Slicer Additions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed models and textures for Orcaslicer and Prusaslicer and Orcaslicer printer profiles.
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 2624
- Wydruki
- 2
- Wyświetlenia
- 5550
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus.
Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with klipper. The "Klipper Speed Benchy" orca profile is for a 23 minute benchy that follows speed benchy rules but doesn't destroy the quality. Feel free to use these as a benchmark and tune them for your printer, also note that my start/end gcode uses 3DPrintDemons start/end macros, update these macro names to whatever you are using in klipper.
I also included a basic orca printer profile with aux fan enabled and my retraction and cooling settings. It could be used with SV07 if you change the bed size.
You can add Orcaslicer printer and slicing profiles by "importing configs". Keep the files in a folder of your choice, then click file→ import→ import configs.
Loading bed model and textures:
Orcaslicer open the printer profile and click “set” next to “Printable area”, then load the files.
Prusaslicer go to printer settings and click “set” next to “Bed shape”, then load the files.
Good luck and will update with Prusaslicer profiles when I use it next.