1 / 1
Emergency showerhead.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
My street has a bad water mainline and we have been plagued with water outages lately. Town contractors are digging a hole somewhere almost weekly.
This showerhead is designed for a 12V 2A submersible pump. Stem has ridges to help with the hose clamping. If you use a 10mm ID PVC hose like i did, it needs some heat and force to go over the stem, but it'll never unseat itself after that.
Print settings:
I printed it with 0.2mm layers, 100% infill. No supports. Squirt holes have a bellmouth on the inside to help with waterflow, those might fail if printed with higher layers - or work better with lower layers.