Separator and label holder for Lidl drawer locker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For little and big drawer, both a label holder and a separator.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Last week, there was those drawer locker during the Lidl DIY week at Lidl. I bought 2 of the one with 32 little drawers and 1 with the biggest drawers at our local shop.
Link to order on website as well : https://www.lidl.fr/p/parkside-casier-a-tiroirs/p100365198
That's a really good deal, 9.99 €, unbeatable from everything i have seen elsewhere. In case of you would get it, you can order it on there website with very very low shipping fees.
Unfortunatly, i had one separator broken for the little drawer, and also there was not enough of it to use 2 by drawer, and also appeared there was no seperator for biggest drawer.
I decided to modelize it and to print it.
Also noticed there was a slot to put a label holder, so i also designed those.
What to print :
- The one on left on the picture above → Little drawer separator.stl, Big drawer separator.stl, Little drawer label.stl, Big drawer label.stl
- The one on rift on the picture above → Little drawer separator.stl, Little drawer label.stl
I used ABS, but can print with any material. Files are supposed to be at the corect orientation to be printed when imported into the slicer.
Enjoy !