Stackable Designer Tray Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DO NOT UNDERESTIMATE THIS PRINT! Print settings must be well tuned. But the end result is worth it!
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 343
- Wydruki
- 2
- Wyświetlenia
- 1123
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please take time to set up optimal slicing settings in order to get a fast and beautiful print!
Or better yet, feel free to use my .3mf PrusaSlicer preset for your printer.
--------------------------------
Stackable, modular containers that look and function great. Come with an optional lid to hide your contents.
Sizes (LxWxH):
- Full size: 155x104x45 mm
- Half size: 72x104x45 mm (with an option for 22.5 mm height)
- Quarter size: 72x52x45 mm (with an option for 13,7 mm height)
- Square: 60x60x45 mm
Recommended settings:
- Layer height: 0.20-0.40 mm
- Nozzle size: 0.4-0.6 mm
- Avoid crossing perimeters: ON
- Infill: 15% Grid Pattern for the bottom plate
0% For the vertical walls - Parameters: 1 if nozzle size is 0.6 mm
1 or 2 if nozzle size is 0.4 mm
I recommend not infilling little gaps between walls unless it's the last few top layers. The gap fill and retractions will not only take a very long time, but also potentially degrade the print quality.
In case you have a Prusa MINI+, you can just use my generated gcode for a 0.6 mm nozzle.