Star Wars Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coaster depicting the insignia of several factions from Star Wars
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 362
- Wydruki
- 1
- Wyświetlenia
- 1380
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Coasters showing the insignia of several factions from Star Wars. The coasters are 2mm thick and 80mm in diameter. The designs are:
- Galactic Republic
- Empire
- First Order
- Confederacy of Independent Systems (Seperatists)
- Rebellion
- New Republic
- Jedi Order
- High Republic 1
- High Republic 2
- Corellian Engineering Corporation
- Sienar Fleet Systems
- Kuat Drive Yards
Print Instructions
Printed at 0.2mm layer height.
All designs are added as a negative volume. In PrusaSlicer, this is done by: Load “base.stl”. Right-click on base, select “Add negative volume”→"Load…". Then choose your design.
Use filament changes for colors. Start with the base color, switch to the second color at about 1.4mm, then back to the base color at 1.8mm.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#