1 / 2
Zeus and the Giants (Stone Carving) - Hueforge Print — zdjęcie 1
1 / 2

Zeus and the Giants (Stone Carving) - Hueforge Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zeus and the Giants - Stone Sculpture turned Hueforge Print

Ocena
0 / 5
Polubienia
44
Pobrania
157
Wydruki
0
Wyświetlenia
977
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Zeus and the Giants

This was printed with a 0.2 nozzle, which produces 0.04mm layers a little nicer. It is possible with a 0.4 nozzle, though you will need to have calibrated your printer and filaments very carefully.

You can however, still print this with a 0.4 nozzle and change the layer height of the stl to 0.08mm, by just adjusting the .hfp file in Hueforge that can be downloaded here. Alternatively, you can also do some math and use half the layer height (if it tells you to swap at layer 24, you'll want to swap at layer 12).

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

  • PLA Siddament Black Transmission Distance: 0.2
  • PLA+ Sunlu Coffee Transmission Distance: 3
  • PLA Sunlu Beige Transmission Distance: 8.2
  • PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:

  • Start with Black
  • At layer #24 (1.08mm) swap to Coffee
  • At layer #28 (1.24mm) swap to Beige
  • At layer #43 (1.84mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.

Tagi