1 / 1
Sandberg Blue Storm headphones' bridge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair part for wireless headphones Sandberg. The bridge had many cracks and one of them was fatal.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
- Remove 2 bolts on each side at the joint.
- Take a flat screwdriver.
- Slightly bend the joint and the bolts' place and push the screwdriver between wide metal plate and plastic part from the outer side towards top. The broken part should popup.
- Print the replacement part, heat it by hair fan and put it in a pot to bend it.
- Put it all together. The cable has to go through the middle. Press the parts together while screwing the bolts otherwise the thread will be destroyed.
- Secure the bolted and printed parts with a (transparent) duck tape.
Use PETG. Don't use PLA because it will break sooner or later.