Voronoi Skeleton Banded Cylinders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stamp and emboss clay with these five textured hollow cylinders decorated with dense center bands.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 231
- Wydruki
- 0
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Voronoi patterns provide seamless changing cells on the surface of these six hollow cylinders. A center band features a finer Voronoi pattern for visual interest. The shape of the denser pattern is different for each cylinder. Each also features unique Voronoi patterns,
Each cylinder is about 43.5mm in diameter and a bit less than 72mm tall. They're easy to roll with your hand, laying down interesting textures on a clay surface. Practice on scrap clay to get a feel for best pressure and speed. They'll clean up easily with a jet of water. They also make fine cat toys.
The rolling pattern is seamless.
The photos show three different banded Voronoi cylinders. You can examine all six of the cylinders in detail using the 3D Viewer. All my designs are carefully designed and tested. I can generate additional variations if people show interest.
Are they printable? Yes: with the help of a wide brim on the build plate: I use a 12mm radius brim. Sandpaper cleans up bumps. I've printed these in ABS but PLA and PETG should work fine, too. I print with a layer height of 0.12mm for fine resolution, but they will print with 0.20mm layers.
If you want to encourage this project please leave a comment and show your results. Suggestions welcome. Thanks.
Check out my other clay stamp models in this Clay/Pottery Stamps Collection.