1 / 4
HTC Vive Lighthouse Suspended Ceiling Hooks (15mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took Hacky97's ceiling mounts, and found that they were made for bars that were much narrower. I shortened the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Post-Printing
Assembly
I used:
4x M4 nuts
2x M4*12 screws
2x M4*16 screws
I used the M412 for the bottom hole, since it only had to go through the single bracket, and the M416 for the top, since it had 2 brackets to go through. Put a nut on both, and tighten while in ceiling.
Category: Toy & Game Accessories