LGX lite stealthburner filament cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adding ercf and other mmu filament cutting to the voron stealthburner when using the lgx lite extruder
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 460
- Wydruki
- 1
- Wyświetlenia
- 6823
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
this is a mash up between a few different lgx lite mounts as well as the filametrix toolhead knife to allow for cutting of filament rather than tuning tips. i realised i would need this when tuning pla tips on a high flow hotend like the dragon was just way to unreliable
this has been working fine for me for over 3000 swaps now but if you have any problems please let me know!
the model unfortunately does require supports so please keep that in mind
check the original github for the toolhead mounts and knife holder
for the rest of the needed files please see here
https://github.com/BondtechAB/Voron/tree/main/Voron_2.4-VT-SW/LGX_lite/STL/LGX_lite-CW2-SB