1 / 3
Fotostreifenrahmen / photo strip frame — zdjęcie 1
1 / 3

Fotostreifenrahmen / photo strip frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ein Rahmen für Fotostreifen aus einem Fotoautomaten. Passt für die meisten Größen, zuschneiden kann man immer.…

Ocena
0 / 5
Polubienia
26
Pobrania
114
Wydruki
0
Wyświetlenia
500
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ein Rahmen für Fotostreifen aus einem Fotoautomaten. Passt für die meisten Größen, zuschneiden kann man immer.

Gedruckt wird mit der Front nach unten, also aufs Druckbett. Nur, weil Leute manchmal fragen.

Die weissen Stellen werden mit zwei Schichten weiss gedruckt (was bei weissen Stellen oftmals Sinn ergibt), der Rest (und natürlich der Anfang) in schwarz.

Support ist nicht nötig, da die Ausnehmungen sehr klein sind. Schafft das der Drucker nicht, bitte einen neuen besorgen.

Den Füllgrad recht hoch (oder besser 100%) wählen, dann verschleppt ein eventueller Wind nicht gleich eure Katzenfotos (oder so).

A frame for photo strips from a photo booth. Fits most sizes, you can always trim.

It is printed face down, i.e. on the print bed. Just because sometimes people ask.

The white areas are printed white with two layers (which often makes sense with white areas), the rest (and of course the beginning) in black.

Support is not necessary as the recesses are very small. If the printer cannot do this, please get a new one.

Choose the filling level quite high (or better 100%), then a possible wind will not immediately drag your cat photos (or something like that).

Print Settings

Printer Brand:

Flsun

Printer:

Flsun Super Racer

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2mm

Infill:

100%

Filament: deins / yours PLA schwarz / black, weiss / white

Category: Decor

Tagi