1 / 3
Small Watertight Container
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This small tubular container can be made watertight by inserting a commercially available 44mm sealing ring, which i s pressed into the groove on top of the body part. When the lid is screwed on firmly, the contents of the submerged container will remain dry (keep it short and shallow- my tests do not hold up to an IP rating).
Contained volume: ca. 120mm (h) x 40mm (d) (38mm at the top)
Printing Instruction
Generally very easy to print. No supports required when printing the parts with their closed side on the print bed.
I recommend increasing the number pf perimeters to obtain a solid hull.