1 / 4
Snail Hinged roll clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to hold my wife's rolled up Silicone 19"x15" backing sheet. The two parts snap together.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
You have a choice of the captive or non captive. The captive ones stay as an assembly nicer, wiggle the parts together in the open position Until they snap in place. They will need support everywhere to print.
The non captive lets you see the snail hinge in action. It also won’t need support.
Have fun with it :). I included the Fusion360 file if you want to modify the roll diameter. If there is interest I will make it more parametric.