Notched Lid for MK4 tool box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Notched remixes of Christian Engelmeier's toolbox lids.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are notched remixes of Christian Engelmeier's toolbox lids. While the originals will probably serve fine for most, I have large fingers and often bite my nails, so I sometimes had difficulty using the bevel to open the toolbox lid. To solve this problem, I implemented a solution that I also used on my MK3s+… notches for my sausage fingers. If you have sausage fingers like me, you may find them useful.
I printed them in PETG with a .4 nozzle at .3 layer height (Draft settings). They do not require supports or a brim to print.
The first layer finish is not a result of the model, but printing on a textured/patterned PEO sheet.