1 / 2
Freddy Kruger Light Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light Box
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 1528
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (37)Powiązane
This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit.
You will get 2 files
- The Front Plate - This is where all of the color lives. Import this file into your bambu studio slicer, lay it flat and then color it just like any other file you would add color to. Choose the colors of your choice then load the AMS and print!
- The Backplate - This is where the LED strip will be added. I have modeled in a nice 2mm wide channel that will house the LED strip very nicely. Doing it this way prevents the light from ever coming off or falling down. Import this file into Bambu studio and lay it on its back. Slice and print. When done run the LED strip through the hole in the back and work it around the channel until you have it all covered. Most of the files will only need a 3 foot LED stip. These are the lights I use.
All filaments used will be found here