Quest 2 wall mount (compatible with VR Cover)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quest 2 wall mount (compatible with VR Cover)
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 229
- Wydruki
- 1
- Wyświetlenia
- 1208
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
I previously had a "nose mount" for the Quest 2, but since I bought the VR Cover face interface, I couldn't use that one anymore. I made another mount from scratch that has the headbands as the support point for the mount.
Because the gap between the headset and its arms is pretty small, the wall mount is itself pretty thin (3mm at the base, 2mm at the top), so please make sure you have at least a 40% infill and print in the position shown in the printscreen from Cura so the lines are stronger. Also, make sure your bed is leveled so the layers adhere properly.
When placing the Quest 2 on the mount, it's easier to slide it in from the front, since the support's arms are flexible and can "hug" the headset. You can also slide it from above, but I find it easier from the front.
You can mount the support to the wall with 2 screws or you can modify the Solidworks file to your liking and chose your own mounting mechanism.
Tips are always welcome!