Toolbox Locking Drawer Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinge to fix broken locking drawer latch
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I received this snapon branded toolbox from a friend that he had for a very long time and one of the hinges for the sliding door lock mechanisms was broken. I came up with this which fixed my issue. Now my sliding doors lock and unlock when opening the top lid. I printed it in PETG with 100% but ASA would probably be good too. I tried different ways of JB welding or gluing it to the lid so I didn't have to put holes in the lid but ultimately using 2 small bolts did the trick. This may work for other branded toolboxes too, I just don't have another one to try it on. Use a nail or any small round item as the pin.