Wall mounted bit holder for 40pcs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 2020-12-17: As i get alot of feedback saying that the loosefit version it so tight, i added a "extra loosefit"…
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 415
- Wydruki
- 0
- Wyświetlenia
- 950
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 2020-12-17:
As i get alot of feedback saying that the loosefit version it so tight, i added a "extra loosefit" version today. Nominal measurement on a 1/4" bit would be 6,35 mm side to side so the tight fit version is 6,35 mm. The loosefit is 6,55 mm and the extra loosefit is 6,75 mm. Im used to work with micrometer dimension so i might have been to hard on the tolerances of this part. Enjoy the updated version :)
I needed to organize my tools so i designed some tool holders designed to be mounted vertically.
In this release, there are two versions:
-Tight fit, holds the bits harder.
-Loose fit, holes are increased with an offset of 0.075mm (i liked this one the best).
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Add:north PETG Grey
Category: Tool Holders & Boxes