Thinkware H100 part of mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a part of the mount i made for my friends Thinkware H100 dash cam. The part was missing when he got it and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a part of the mount i made for my friends Thinkware H100 dash cam. The part was missing when he got it and didnt bother contacting the store. Instead, i got the challange to make the part and here it is.
I made this in two parts that is joined by a countersunk M3 x 10mm, i recomend some adhesive or glue between them so it stays together in a vibrating enviroment. The hole can be pre threaded but a M3 will make its own threads in plastic without any issue.
Print Settings
Printer:
Geeetech Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
30%
Category: Automotive