Quanum V2 front camera mount (snap-on)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a front camera mount for the Quanum V2 FPV goggles. It will fit a standard 32mm X 32mm camera and it snaps in…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a front camera mount for the Quanum V2 FPV goggles. It will fit a standard 32mm X 32mm camera and it snaps in the mount holds on the back of the LCD. It Require no zip-tie, but will need 4 pcs 2mm self taping screws (mine came from a scapped PS3 controller) to secure the camera, and 4 pcs 3mm self taping screws (or M3 if you tap the holes before).
Cheaper cameras (and some more exensive ones?) might have parts of the panel left on it, it will need to be cut or sanded away for the camera to fit correctly in the mount.
I printed it as 0.1mm resolution, 30% fill and no support or rafts.
This is my first make so please be gentle :)
Category: R/C Vehicles