1 / 2
Pulley for 4L, A V-Belts, 2" OD, for 5/8" Shaft — zdjęcie 1
1 / 2

Pulley for 4L, A V-Belts, 2" OD, for 5/8" Shaft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Light duty 2.0" V-belt pulley (4L), 5/8" partially keyed bore

Ocena
0 / 5
Polubienia
3
Pobrania
61
Wydruki
0
Wyświetlenia
304
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Similar to McMaster-Carr P/N: 6245K16

Light duty 4L, A V-belt pulley 2.05" OD (1.75" pitch dia.) for 5/8" diameter shaft, partial 3/16" keyway. Designed for M4 set screw put can be re-tapped for 10-24 if needed.  

Prints in three pieces - attempt monolithic part with 70° overhang at your peril! Final assembly requires adhesive suitable for whatever filament you use. I haven't yet tested - feedback is welcome!

My prints:

  • PETG-CF @ 25% triangles infill
  • 6 wall loops, 6 top/bottom layers
  • no supports or brim
  • adjust fit by uniformly scaling parts (not hole XY comp.)
  • test fit dry, glue with 2-part epoxy

Tagi