Remote Focus & WIFI hostspot for Celestron Telsecope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using a raspberry Pi Zero, Stepper motor and a bit of questionable python code made a remote for Celestron Scope to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Using a raspberry Pi Zero, Stepper motor and a bit of questionable python code made a remote for Celestron Scope to control the scope and zoom without touching the scope. Also printed a case for a Pi Powerpack to power USB & Stepper motor.
Print instructions
You will need:
Raspberry Pi Zero W
28BYJ-48 5V Stepper Motor + driver
20x 6mm BB gun pellets (ball bearings)
Optional: Pi Power pack
Install Raspbian, minimum install + python and hostapd (for wifi access point). Unfortunately my computer has crashed so I don't have the Python files for this. It was a simple Flask application with a two sets of buttons, one set for course adjustment and one for fine adjustment.