stargazing rabbit tap handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tap handle for a standard tower beer faucet. Use for all your rabbit-themed beers. ;-)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Used MeshLab to combine yet another variation of Neon22's Customizable Profiled Handle (https://www.thingiverse.com/thing:923244) and pmoews stargazing rabbit (https://www.thingiverse.com/thing:25644) into a tap handle for a standard tower beer faucet.
bunny_tap_handle_complete2.stl has an 8.5mm hole and is intended to be tapped.
bunny_tap_handle_11mmHole.stl has a wider hole intended for a threaded insert.
Print Settings
Printer Brand: SeeMeCNC
Printer: Rostock MAX
Rafts: No
Supports: Yes
Resolution: 0.25 mm
Infill: 20% with a solid modifier for base
Notes:
Used Hatchbox PLA Bronze 1.75mm filament. Printed upright. I used a modifier in Slic3r to make the first 25mm solid infill, with the rest at 20% honeycomb. I then tapped the hole at the bottom post-print to fit the faucet handle threads.
Category: Kitchen & Dining