Extension Pole Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've got an aluminum extension pole and bought a window scrubber to use with it. Naturally, however, every…
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 500
- Wydruki
- 1
- Wyświetlenia
- 2296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I've got an aluminum extension pole and bought a window scrubber to use with it. Naturally, however, every manufacturer wants you to use their pole, so the attachment did not fit - the threads are far inside the handle and the pole does not fit inside.
So, I took the middle section of ricswika's Ice Scraper (https://www.thingiverse.com/thing:1303933) and modified it to make it narrow enough to fit inside the hollow attachment handle. The pole then screws into the other end of the adapter and now I can wash the windows. :-)
Print Settings
Printer Brand: SeeMeCNC
Printer: Rostock MAX v2
Rafts: No
Supports: No
Resolution: 0.3
Infill: 20%
Notes:
Print vertically to avoid supports.
There's a little funkiness in the mesh where the round section transitions to the male threads. I added a modifier in Slic3r to make that shoulder area 100% infill for strength.
Category: Parts