1 / 7
The Owl House Temple — zdjęcie 1
1 / 7

The Owl House Temple

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model of the cathedral-ly looking building in Bonesborough from The Owl House

Ocena
5 / 5
Polubienia
29
Pobrania
106
Wydruki
2
Wyświetlenia
462
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a model of a cathedral-ly looking building which shows up in the background of the town Bonesborough from The Owl House. This building is only shown from two angles, so I had to improvise a bit. I had to make up the backside myself.

The model is 150mm long, 94mm wide, and 120mm tall.

Print Instructions

Printed at 0.2mm layer height. Does not require supports. I've used lightning infill to save time and filament. I had a lot of stringing.

 

 

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

Tagi