APS adapter for Plustek OpticFilm scanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes it possible to scan APS films with OpticFilm 8200i. Probably fits other models as well but I don't know which...
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 297
- Wydruki
- 1
- Wyświetlenia
- 1255
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits at least 8200i. Feed film into adapter - align negatives with the frames. Scan 6 negatives, retract to position 1. Pull film forward 6 frames. Repeat until end. Do not forward to frame 7 until the last photo. Absolutely room for improvement but gets the job done.
Print diagonally (fits exactly on Prusa MK3s bed). I did use PETG. Probably ok with other stuff as well. .20mm/15% infill. The lid shoud be printed upside down (lips up). I did use supports on bed to keep the thin sides precise.
BTW: Use APS Film Cannister tools to get the film tab out: https://www.printables.com/model/50071-aps-film-canister-tools