79-83 TOYOTA Hilux and Corolla Grill Lock Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
79-83 TOYOTA Hilux (RN30, LN40) and Corolla (E70, KE70, TE71, TE72) Grill Lock Clip
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 1006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this is a 3D print replacement for 79-83 TOYOTA Hilux (RN30, LN40) and Corolla (E70, KE70, TE71, TE72) grill lock clip
on these old Japanese cars, this item often overlooked, it's commonly gone or broke and just replaced by zip-ties or screw as a makeshift.. for those who still running these old vehicle like myself, it's often hard to find such trivial plastic parts.. but not anymore, we can just print them now :)
due to the original part geometry that not quite suitable for FDM printing, I've made this replacement by split the original design in half into two mirroring parts
this would allow the parts to be printed easily and have appropriate layer lines for it use, though they'll required some assembly by gluing the two mirroring parts together with cyanoacrylate/crazy-glue, added benefit that the glue would also strengthened the part
I print this in ABS, 0.2 layer, 0.4 line, no support needed, maxed out parameters so it'll give good and strong layer lines
iirc, you'll need a dozen of these for the whole grill..