Airlift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An air powered underwater pump intended for dredging of silt or gravel.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Do you need to excavate some silt or gravel? Or just make a big mess in the water? 3D printing to the rescue!
We needed some way to move relatively large amount of pebbles blocking a sump in a cave. This device fits standard 50mm grey waste pipes and there are printed threads for two different inflator nipples I had at hand. A 12L 200bar cylinder lasts a bit over 10 minutes and it is able to lift even pebbles. Basically whatever fits can be lifted. And of course it makes a premium mess in the water :-)
As always I use PETG, 0.2mm layers, no supports. You will need one M5x25 (or longer) bolt, nut and washer, preferably stainless. And of course a cylinder, regulator and an inflator hose.
Here is how we were testing the first prototype … and enjoying it very much :-)