1 / 5
Vacuum nozzle and fence for DELTA 31-460 Belt Sander — zdjęcie 1
1 / 5

Vacuum nozzle and fence for DELTA 31-460 Belt Sander

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DELTA 31-460 Belt Sander needed Vacuum nozzle and fence

Ocena
0 / 5
Polubienia
8
Pobrania
29
Wydruki
0
Wyświetlenia
686
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I bought this older Delta 10 inch Belt Sander… it needed severe cleaning, lubrication and new sand pads. Newer ones have a vacuum attachment to capture dust  while using, this one did not have such attachment nor was it designed with one. So I set out to design one, and this is my result. I also needed a fence, so I made one of them too

This mates an older Delta belt sander up to a standard 8 gal (30,3L) ShopVac hose to collect dust and dirt from your sander, keeping you area clean and organized of dirt.

Printing requires supports and it takes awhile to dig out the supports from the nozzle orifice.

version 1 was thin around upper of vac nozzle port but still strong.  version 3 has reinforcement around nozzle port and text labeling. 

version 1 works wonderfully on my machine.

or·gan·ized   (ôr′gə-nīzd′)

adj.  1. Functioning in an orderly way or according to a plan: