Can Opener Replacement Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for a generic edge-safe can opener.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Replacement handle for a generic edge-safe can opener I've had forever. The original handle was designed just to press fit over the top of a nut and lock collar - this does the same.
This was actually one of the first models I did, which is why there are two versions. My initial design was perhaps overly chunky. But it also proved to be much stronger than I ever expected, and has been working without issue for two years. So I've never had a reason to print the refined, more space conscious version I modeled later which not only uses a fraction of the plastic, but should also be a bit more comfortable to use if you have normal sized hands.
Printed with a .4mm nozzle, .3mm layers, and 30% infill.