1 / 3
Prusa MK3 MMU2 rear PTFE tube holder with 6mm threads for push locks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa MK3 MMU2 rear PTFE tube holder with 6mm threads for push locks.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 374
- Wydruki
- 5
- Wyświetlenia
- 2890
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 9)Remiksy (0)Kolekcje (136)Powiązane
I added 6mm threads for my push locks instead of inserts to an existing design. I chased the threads with a tap.
I also flushed the backside for printing on the butt end due to lifting as you cant really round the corners on this part.
These are the fitting I used: Witbot PC4-M6 Straight Fitting 4mm thread M6 Connector for 3D Printer (Pack of 10 pcs )